Brand

Weberdry es 114

Weberdry es 114 is a single component, easy to use, 100% water-based, low VOC, internally microfibre-reinforced elastomer protective coating system. It is non-toxic and non-hazardous to applicators or users.
Read more
Read less
Weberdry es 114 is a single component, easy to use, 100% water-based, low VOC, internally microfibre-reinforced elastomer protective coating system. It is non-toxic and non-hazardous to applicators or users.

Marketing description

Weberdry es 114 internal microfibre reinforcement system enables it to cure into a tough, durable membrane to protect concrete and metal substrates. Weberdry es 114 is wear resistant, UV resistant, and adheres strongly to clean, properly prepared substrates when fully cured. Weberdry es 114 can be used with a separate fibre reinforcement fabric for additional strength and toughness to withstand light to medium vehicular traffic.

Weberdry es 114 provides an effective solution for waterproofing, roofing, building repair and preventive maintenance projects. Weberdry es 114 tough, durable, trafficable, protective coating system can be applied over almost any substrate or surface, as long as these surfaces are competent, stable and properly cleaned. Weberdry es 114 can be used as a protective, waterproof, metal or concrete deck roof coating, a trafficable coating system for light to medium traffic.

About this product

  • Weberdry es 114 wall protection system is applied in 3 coats, consisting of 1 priming coat and a minimum of 2 surface coats over the primer.

  • A minimum of 2 coats of Weberdry es 114 is required, but 3 coats are recommended to obtain the specified level of protection.

  • Prime substrate using Weberprim es 121, a water based primer for new concrete/RC surfaces or smooth surfaces is highly recommended.

Features and benefits

  1. Fast drying in exposed environments thus reduces project duration 

  2. Excellent exterior durability and high UV resistant properties 

  3. Excellent adhesion to properly prepared and cleaned substrates 

  4. High build property achieved with a minimum of 2-3 coats 

  5. High early water resistance shortly after application and curing 

  6. No bleeding and no staining of tiles installed over the cured product 

  7. Tolerant to most types of light solvents and detergents 

  8. Easy to apply, a wide range of applications, suitable for almost all substrates and surfaces

Constraints

The waterproofing membrane whilst setting, shall be protected from rain. Air circulation is necessary in enclosed areas to assure the normal setting of the waterproofing membrane.

Documentation

Select all
SDS - WEBERDRY ES 114.pdf - EN
TDS WEBERDRY ES 114.pdf - EN